Nokia Secret Codes for All Models

Nokia Secret Codes: 
On the main screen type in: 
*#06# for checking the IMEI (International Mobile Equipment Identity). 
*#7780# reset to factory settings. 
*#67705646# This will clear the LCD display(operator logo). 
*#0000# To view software version. 
*#2820# Bluetooth device address. 
*#746025625# Sim clock allowed status. 
#pw+1234567890+1# Shows if sim have restrictions. 
*#92702689# - takes you to a secret menu where you may find some of the information below: 
1. Displays Serial Number. 
2. Displays the Month and Year of Manufacture 
3. Displays (if there) the date where the phone was purchased (MMYY) 
4. Displays the date of the last repair - if found (0000) 
5. Shows life timer of phone (time passes since last start) 
*#3370# - Enhanced Full Rate Codec (EFR) activation. Increase signal strength, better signal reception. It also help if u want to use GPRS and the service is not responding or too slow. Phone battery will drain faster though. 
*#3370* - (EFR) deactivation. Phone will automatically restart. Increase battery life by 30% because phone receives less signal from network. 
*#4720# - Half Rate Codec activation. 
*#4720* - Half Rate Codec deactivation. The phone will automatically restart 
If you forgot wallet code for Nokia S60 phone, use this code reset: *#7370925538# 
Note, your data in the wallet will be erased. Phone will ask you the lock code. Default lock code is: 12345 
Press *#3925538# to delete the contents and code of wallet. 
Unlock service provider: Insert sim, turn phone on and press vol up(arrow keys) for 3 seconds, should say pin code. Press C,then press * message should flash, press * again and 04*pin*pin*pin# \ 
*#7328748263373738# resets security code. 
Default security code is 12345 
Change closed caller group (settings >security settings>user groups) to 00000 and ure phone will sound the message tone when you are near a radar speed trap. Setting it to 500 will cause your phone 2 set off security alarms at shop exits, gr8 for practical jokes! (works with some of the Nokia phones.) Press and hold "0" on the main screen to open wap browser. 

Thanks.

NOKIA SECRET CODES

NOKIA SECRET CODES.......

Enhanced Full Rate
For activation enter *#3370#
For deactivation enter *#3370*
In both cases the phone will automatically restart.

Firmware check
*#682371158412125#

Service codes
*#0000# or *#9999# (Not Tested)
1st Line - Software Version
2nd Line - Date of Software release
3rd Line - Phone Type.

*#92702689# or *#92772689# Display the phone's software ve

Use the codes *#5512#,*#5513#,*#5514#,*#5511# in nokia 1600 and the keypad like model 1600. You will get surprise

rmware Version: *#0000#*#51x0# or*#9999# 

View Serial No: *#92772689# 

SIM-LOCK CHECKS:

PROVIDER-LOCK STATUS:  #PW+1234567890+1# 

NETWORK-LOCK:  #PW+1234567890+2# 

 COUNTRY-LOCK STATUS:  #PW+1234567890+3#  

SIM-CARD-LOCK STATUS:   #PW+1234567890+4#

 Enhanced Full Rate (EFR):

 *3370#  to activate EFR. 

#3370#  to deactivate EFR 

Half Rate Mode (HFR):

 *4720#  to activate HFR. 

#4270#  to deactivate HFR. 

Default Security Code: 12345

ORDER UNLOCK CODES FOR THE NOKIA 1600
RETURN TO SECRET CODES HANDSET SELECTION PAGE
Your use of the Nokia 1600 secret codes on this page is completely 'At Your Own Risk'. We are unable to guarantee the correctness or validity of any of the Nokia 1600 secret codes on this page. Because you use the secret codes on this page at your own risk, unlocks.co.uk is unable to accept responsibility or liability for any damage, harm or loss caused by using the Nokia 1600 secret codes or any other secret codes which are displayed on this website. Unlocks.co.uk has added these secret codes for educational purposes only, and as such you should take any necessary precautions
before attempting to use these secret codes

Avast Internet Security V8.0.1489.300 licence Till 2050

Avast Internet Security Licence All Versions(7,8 Etc.,)Valid Till 2050

Avast! Internet Security V8.0.1489.300 Till 2050 licence.rar (1.2 MB)

=========================================================================
Instruction for registering Avast Internet Security upto 2050 using licence
=========================================================================

(1) First of all install Avast Internet Security 7 or 8 Free version.

(2) Now open avast interface.

(3) Now click on "Settings" which is present in the upper corner.

(4) A new pop will open.

(5) Click on "Troubleshooting " option.

(6) Uncheck the checkbox which says "Enable!Avast self defence Mode" and click     
    "ok"and close the interface. 

(7) Now open the licence and install it .

(8) while asking password enter this = " ZeNiX" [Case Sensitive].

(9) Restart your computer .

(10) Check your subscription. 

(11) Enjoy registering it upto 2050.

(12) Avast updates work fine automatically.

(13) Dont Update the program. {if yo do; then re apply the licence}.

(14) Again enable the self defence module following steps 2,3,4,5,6 by checking 
     the checkbox.

(15) All done! Enjoy! :)


Avast! Internet Security V8.0.1489.300 Till 2050 licence.rar (1.2 MB)



HOPE YOU ALL ENJOY...

Torrent Download: 

Avast! Internet Security 2013 v8.0.1489.300 Final Incl Activator Valid Until 2050

 Download .torrent file

THANK YOU...  

Avast 8 Premier Antivirus licence Till 2050

Avast Antivirus 8 Premier With licence Till 2050 (100% Guaranteed Genuine Working)!

Avast Antivirus 8 With licence Till 2050!

Avast 8 Premier Antivirus (140 MB)

 

Avast.2050.License  File (1.4 MB)

Hi guys the new avast pro antivirus 8  has arrived with the licence.Today we are providing the latest avast antivirus 8 full with licence till 2050.The newly arrived avast product have new touch optimized,windows 8 metro interface .

Avast 8 introduces a new feature of  detection engine which monitors suspected files in an isolated environment before you’re able to execute them.And avast promises that it will help the  users to make intelligent decisions, whether files running in the sandbox are malicious or not.

The Market Price of Avast Products.

avast! Pro Antivirus – $39/-
avast! Internet Security –  $49/-
avast! Premier –  $69/-

Don’t worry here we will provide it for free! You all have to do is to just install the ZeNiX licence and enjoy your avast! 8 till 2050 with all new updates without any block.

100% FREE DOWNLOAD !  100% WORKING

Download avast 8 Premier From <<< Click Here (140 MB) >>>

Download Avast 2050 Year Licence licence File From  <<< Click Here (1.4 MB) >>>

Instructions to licence and activate Avast 8.

#1. Download and install the latest trial version of any avast! edition such as Internet Security,Premier or Pro Anti Virus from the below provided links.

#2.Now,go to avast settings > troubleshooting and disable avast! self-defense module.

#3.Download the ZeNiX simple installer.

#4.Extract it and run ZeNiX Installer.exe

#5.Click install button

#6. Password : ZeNiX

#7.when installation is completed the avast and installer will be closed automatically.

#8.Now restart your computer.

Yaar!!!!!!Your antivirus has been licence till 2050.

Now enjoy the latest edition of avast without any interruption.

Important!

*  To use the ZeNiX  installer the self defense  should be disabled.

*   You can install any update including avast application updates and virus-definition updates while using this subscription(by licence).

*   If anything goes wrong with the licence and activation, just reinstall the licence file.

Download avast 8 Premier From <<< Click Here (140 MB) >>>

Download Avast 2050 Year Licence licence File From  <<< Click Here (1.4 MB) >>>

Note : Share this post to your Friends & Make them also Get benefit. Give your            valuable Comments Below... Thank you !.

Download USB Disk Security 6.1.0.432

USB Disk Security provides protection against any malicious programs trying to attack via USB drive. It delivers high level of protection against theft and accidental disclosure of confidential data, and prevents unauthorized persons from stealing your data. USB Disk Security is the best security software to protect offline computer without the need for signature updates. This light and easy to use solution is compatible with other antivirus software and doesn't slow down your computer at all.

Serial Key :-

Name: ABEL               Download link :USB Disk Security 6.1.0.432.zip (12.68 MB)

Serial: 17752

OR                                DOWNLOAD : USB Disk Security 6.1.0.432.zip (12.68 MB)

Name: ALAN 

Serial: 17744 

Note : Share this post to your Friends Thank you.

Windows Loader v2.2.1 Download

Windows Genuine Activator :

The safe and easy way to activate Windows. This is the loader application that's used by millions of  people worldwide, well known for passing Microsoft's WAT (Windows Activation Technologies) and is arguably the safest Windows activation exploit ever created. The application itself injects a SLIC (System Licensed Internal Code) into your system before Windows boots; this is what fools Windows into thinking it's genuine.

LINK 1 :<<<  DOWNLOAD (1.45 MB )  >>>

LINK 2 :<<< Download (1.45 MB) >>>

DOWNLOAD LINK :Windows Loader v2.2.1.rar (1.45 MB)

Features:

1. It works on 32-bit and 64-bit systems
2. It's compatible with Windows 7 SP1 and all system updates
3. It's compatible with all system languages
4. It can be used to pre-activate Windows
5. It allows you to install custom OEM information
6. It features application integrity checking
7. It supports hidden partitions and some complex setups
8. It can work alongside Linux's GRUB or any other boot manager
9. It works with VMware, VirtualBox and Hyper-V
10. It works with most hard drive encryption software e.g. TrueCrypt or BitLocker
11. It allows you to add your own certificates and serials externally
12. It will install just the certificate and serial for users with an existing SLIC 2.1
13. It features automated system profiling (The application matches everything up for you)
14. It won't modify any system files
15. It runs before Windows is launched
16. No extra processes are run so you have nothing eating at your RAM
17. All key parts of the loader are encrypted with a custom encryption
18. Every user has a unique version of the loader installed on his or her system

Supported operating systems :

Windows 7 Ultimate

Windows 7 Ultimate E

Windows 7 Professional

Windows 7 Professional E

Windows 7 Home Premium

Windows 7 Home Premium E

Windows 7 Home Basic

Windows 7 Starter

Windows 7 Starter E

Windows Vista Ultimate

Windows Vista Business

Windows Vista Business N

Windows Vista Home Premium

Windows Vista Home Basic

Windows Vista Home Basic N

Windows Vista Starter

Windows Server 2008 Enterprise

Windows Server 2008 Enterprise (Without Hyper-V)

Windows Server 2008 Foundation

Windows Server 2008 Standard

Windows Small Business Server 2008

Windows Storage Server 2008 Standard

Windows Storage Server 2008 R2 Essentials

Windows Server 2008 R2 Enterprise

Windows Server 2008 R2 Foundation

Windows Server 2008 R2 Standard

Windows Server 2008 R2 Datacenter

Windows Small Business Server 2011 Standard

Windows Small Business Server 2011 Essentials

Windows Home Server 2011

Windows Server 2012 Standard

Windows Server 2012 Essentials

Windows Server 2012 Foundation

Windows Server 2012 Datacenter

Windows Storage Server 2012 Standard

Windows Storage Server 2012 Workgroup

Windows MultiPoint Server 2012 Standard

Windows MultiPoint Server 2012 Premium

LINK 1 :<<< Download Windows Loader v2.2.1.rar(1.45 MB)  >>>

LINK 2 :<<< Download Windows Loder v2.2.1(1.45 MB) >>>

Note: You must be running build 7600 or greater for Windows 7 and Windows Server 2008 R2.

Note: I don't recommend using any of the Windows 7 E editions.

Note: Windows 7 N editions will only be supported when OEM SLP serials leak.

Note : Please share this post to your friends... Thank you.

Download Google Translate For Windows

 Input Tools for Windows

Type anywhere in your language

Google Input Tools for Windows is an input method editor which allows users to enter text in any of the supported languages using a Latin (English / QWERTY) keyboard. Users can type a word the way it sounds using Latin characters and Google Input Tools for Windows will convert the word to its native script. Available input tools include transliteration, IME, and on-screen keyboards.

Google Input Tools for Windows is currently available for 22 different languages: Amharic, Arabic, Bengali, Persian, Greek, Gujarati, Hebrew, Hindi, Kannada, Malayalam, Marathi, Nepali, Oriya, Punjabi, Russian, Sanskrit, Serbian, Sinhala, Tamil, Telugu, Tigrinya and Urdu.  

Download

Smart, easy to use and intuitive!

Choose your languages

•  Amharic
   
•  Arabic
 
•  Bengali
   
•  Persian
 
•  Greek
   
•  Gujarati
 
•  Hebrew
   
•  Hindi
 
•  Kannada
   
•  Malayalam
 
•  Marathi
   
•  Nepali
 
•  Oriya
   
•  Punjabi
 
•  Russian
   
•  Sanskrit
 
•  Serbian
   
•  Sinhala
 
•  Tamil
   
•  Telugu
 
•  Tigrinya
   
•  Urdu

 I agree to the Google Terms of Service and Privacy Policy.

Download

Requires Windows 7/Vista/XP (32-bit/64-bit)
Installation instructions

Features :

• Offline Support

  No internet connection is required.

• Word Completions

  Dictionary-based word completions for prefixes.

• Personalized Choices

  Remembers user corrections along with macro and canonical support.

• Easy Keyboard

  Dictionary-enabled keyboard to enter rare and complex words.

• Quick Search

  Single-click web search for highlighted words.

• Cool Customizations

  Customize candidate window size, display fonts and more.

Download & Installation Procedure:

To download and install, follow these steps:

1. On the " download " page, select the languages by checking the checkboxes. More than one language of input tools can be installed on the same client machine.
2. Check the checkbox before "I agree to the Google Terms of Service and Privacy Policy.", and click "Download" button to download installer.
3. Run the installer after download completed, and follow the instructions on screen.

Note: Only one instance of the Google Input Tools will be installed per machine, but the configuration can be set differently for each user.

Configuration:

To use Google Input Tools with other applications, first open the application and then select the input tool. Google Input Tools can be opened by clicking on the language bar on the desktop, then selecting the input tool language icon. Alternatively, input tools can be enabled using a shortcut key if it has been configured previously. To close an input tool, change the language in language bar, right-click on the current application to see whether it supports 'Close IME' popup menu option, or just close the current application).

Displaying Language Bar

On the desktop, right-click on the taskbar, then select Toolbars → Language bar

Enabling Language Bar

If the 'Language bar' option is not visible in the 'Toolbars' menu, it needs to be enabled through the Control Panel:

Windows 7/Vista

1. Navigate to the Control Panel → Regional and Language Options → Keyboard and Languages tab
2. Click on the Change keyboards… button and open the Text services and input languages dialog
3. Navigate to Language Bar tab
4. Enable the radio button Docked in the taskbar under the Language Bar section
5. Apply all settings, then try to display the language bar as described in the previous section.

Windows XP

1. Go to Control Panel → Regional and Language Options → Languages tab → Text services and input languages (Details)→ Advanced tab
2. Make sure that under System configuration, the option Turn off advanced text services is not checked.
3. Go to Control Panel → Regional and Language Options → Languages tab → Text services and input languages (Details)→ Settings tab
4. Click Language Bar
5. Select Show the Language bar on the desktop. Click OK.
6. Go to Control Panel → Regional and Language Options → Languages Tab
7. Make sure that the option Install files for East Asian languages is checked in the checkboxes. This requires installation of system files and the system will prompt for you to insert the Operating System Disc.
8. If you are going to install IME for Indic languages or right-to-left languages, also make sure that the option Install files for complex scripts and right to left languages is checked in the checkboxes. This requires installation of system files and the system will prompt for you to insert the Operating System Disc.
9. Apply all settings and try to display language bar as described in the previous section.

Input Tools Shortcut

A shortcut key sequence can be applied to input tools, which can be used to quickly enable them for any in-focus application. To set up a shortcut, follow these steps:

Windows 7/Vista

1. Control Panel → Regional and Language Options → Keyboard and Languages tab
2. Click on Change keyboards… button to open Text services and input languages dialog
3. Navigate to General tab
4. If Google [Language] Input is not listed in Installed Services box, then click Add; in the Add Input language dialog box, go to the language for which you want to enable the input tools in the languages tree and expand it. Check the checkbox next to Google [Language] Input in the list.
5. Navigate to Advanced key settings tab
6. In Hot keys for input languages, select To [Language] - Google Input Tools
7. Press Change Key Sequence
8. Select Enable Key Sequence
9. Select a key sequence, such as Left ALT + SHIFT + Key 1
10. Apply all changes
11. Test the changes - open an application and press Left ALT + SHIFT + Key 1 (or your custom shortcut) and the input tool should open.

Windows XP

1. Control Panel → Regional and Language Options → Languages tab → Text services and input languages (Details) →Settings Tab
2. If either [Language] or Google [Language] Input is not listed in the Installed Services box, then click Add and in the Add Input language dialog box select [Language] in Input language and Google [Language] Input in Keyboard layout/IME. Click OK
3. Press Key Settings
4. In Hot keys for input languages, select Switch to [Language]-Google [Language] Input
5. Press Change Key Sequence
6. Select Enable Key Sequence
7. Select a key sequence, such as Left ALT + SHIFT + Key 1
8. Apply all changes
9. Test the changes - open an application and press Left ALT + SHIFT + Key 1 (or your custom shortcut) and the input tool should open.

Features

Status window

When Google Input Tools is enabled for an application, it will display a status window on the screen. By default this window will be placed at the bottom-right corner of the desktop, but can be dragged to any other part of the screen as well. The status window contains configuration options for the currently selected input tool. It includes three to five icons (depending on the language and features available), with the application icon at the far left. Next to the application icon, in order, are the Input Tools language indicator, the keyboard button (not present for some languages), the canonical mode button (only present if you have canonical schemes associated with the input tool) and the menu button.

Edit window (Candidate list)

When Input Tools is enabled for an application, it displays a window with the typed text and the corresponding word choices in the input language. In the below example, user has typed 'googl' and the input tool has displayed five choices (numbered 1 to 5). This window is sometimes called a 'candidate list'.

Navigation and selection

The currently selected (highlighted) candidate in the edit window is the active choice. The active choice can be changed by using theBOTTOM-ARROW or TAB keys to move down the selection, or the UP-ARROW or SHIFT + TAB keys to move up. To select one of the choices for input, use the ENTER key which inserts the active choice at the current cursor position. Using the SPACE key or any otherPUNCTUATION CHARACTER also inserts the active choice, along with the typed punctuation character (unless the punctuation character matches one or more candidate suggestions). To insert any candidate, even if not the active choice, type its position number as in: CTRL + [choice_number].

Word completions

The choices displayed in edit window will appear in either BLACK or BLUE. Literal matches for what was typed are displayed in BLACK, and will always be grouped in front. If there are better dictionary-based word completions for what was typed, those choices are displayed in BLUE and placed behind.

Paging

The input tools only display five choices in the edit window by default (these five choices comprise a page). If there are more candidates, additional choices are displayed on the next page. To page up or down, use the small arrow buttons at the right side of the edit window, or use the Page Up and Page Down keys. Using the arrow or TAB keys to navigate choices will also move to the next or previous page when the active choice is at the start or end of the edit window. You can configure the number of choices displayed per page by clicking the status window's menu button.

Search

Clicking on the Google logo in the edit window will search the web for the active/highlighted choice using Google.com. Search can also be triggered for any non-active choice by right-clicking, and then clicking the Search… option.

User cache

In some circumstances, the initial active choice is the best option (in the example below, the second choice was the desired option).

To make input easier over time, Google Input Tools remembers previous selections and improves the order of candidates. To share this information across all applications for a user, this personalization is maintained for each user account on the computer. This personalization can be disabled by using the 'Disable User Cache' option, available from the menu button on the status window. Note that caching (personalization) does not apply for word completions shown in BLUE, only for word choices shown in BLACK.

Switch to English

The input tools can be switched on or off easily, allowing fast changes between typing in the input tool language and typing in English. To enable or disable the current input tool, click the input tool language button in the status window or use the keyboard shortcuts CTRL + G orF12.

Keyboard

For some rare or complex words, the input choices given may not include the intended word or phrase. In these situations, the flexible keyboard allows input of any possible word. To open the flexible keyboard, click the keyboard button on status window or by using the keyboard shortcut CTRL + K. To enter characters, you can either type on your physical keyboard or use the mouse to pick on the flexible keyboard. You can hide/show the on-screen keyboard by clicking the up/down arrow on status window. It can be closed by clicking the keyboard button again on status window, or by using the shortcut CTRL + K or ESC.

Customization

You can customize many features in the Google Input Tools menu. Options available through the popup menu in the status window are:

• Change or activate one of the available canonical schemes (available only if there is at least one scheme in the Schemes directory).
• Select the font and size to be used to display candidates in the edit window (Suggestion Font).
• Select the font and size to be used to display English/Latin characters inside the edit window.
• Set the page size for the edit window (to restrict the number of choices offered).
• Enable or disable the user cache.
• Add/Edit or Delete macros.
• Information about Google Input Tools, including current version.
• Help documentation, which links to this page.

Special cases

There are some special cases in how the input tools behave for some characters in some languages:

• Example in Arabic for the special case of a SPACE, where it is part of the typed word:
• Example in Arabic for the special case of PUNCTUATION, where it is part of the typed word:
• Example in Greek for the special case of CAPITALIZATION, where the first character in uppercase retains its casing:
• Example in Greek for the special case of CAPITALIZATION, where an all uppercase word retains its casing.
• Example in Greek for the special case of DIGITS, where the number is converted digits instead of its whole value:

Uninstall :

To uninstall, follow these steps:

1. Click on the "Start" menu.
2. Select "Control Panel" and then go to"Add or Remove Programs".
3. To uninstall all languages including the framework:
   • In the program list, select the "Google Input Tools " then click on "Change/Remove" button.
   • In the "Uninstall Google Input Tools" dialog box, click "Yes".
   • You need to restart computer to make it take effect.
4. To uninstall one language:
   • In the program list, select the "Google Input [Language] " then click on "Change/Remove" button.
   • In the "Uninstall Google Input [Language]" dialog box, click "Yes".

                      Click hear to Download Google Tamil Input Setup.exe

Note : Please share this post to your friends... Thank you.